Fresh Water Pumps

iL200 Pump Kit 12V
Portable pumping kit

* Output: up to 12.7 litres/minute at up to 1bar (2.8 gallons/minute at 14psi)
* Maximum Current: 2.8 amps
* Cable Length: 1(m)
* Dimensions: Pump 130mm long, 36mm diameter
* Suitable for fresh or salt water
* Water transfer, deck shower, or deck wash
* Water Systems to 60 ºC
* Intermittent rating of 20 minutes.Should not be run dry for long periods
* Motor life approx 100 hours
* Includes; Spray Nozzle, 4m cable with battery clips, 3m food quality layflat hose.
* Actual Weight: 0.66 Kg (Approx. 0.91 Kg packed)

Flow Rate is 17 litres per minute at a pressure of 2.8 bar/40 psi. 12 V. 9.2 Amp. Dimensions are 250 x 108 x 98. Comes with fittings kit including :
•Straight fittings
•Elbow fittings
• Straight threaded fittings.
Fittings with speedfit connectors and « O » ring for easy pump connection.

Flow Rate is 12.5 litres per minute at a pressure of 2.45 bar/35 psi. 12 V. 7 Amp. Dimensions are 210 x 108 x 98. Comes with fittings kit including :
•Straight fittings
•Elbow fittings
• Straight threaded fittings.
Fittings with speedfit connectors and « O » ring for easy pump connection.

Flow Rate is 8 litres per minute at a pressure of 2.6 bar/40 psi. 12 V. 3,9 Amp. Dimensions are 210 x 110 x 120. Comes with fittings kit including :
•Straight fittings
•Elbow fittings
• Straight threaded fittings.
Fittings with speedfit connectors and « O » ring for easy pump connection.

Flow Rate is 3 litres per minute at a pressure of 4.5 bar/65 psi. 12 V. 2.5 Amp. Dimensions are 165 x 100 x 63. Comes with fittings kit including :
•Straight fittings
•Elbow fittings
• Straight threaded fittings.
Fittings with speedfit connectors and « O » ring for easy pump connection.

Multi-fixture. Dimensions: 226 x 127 x 112mm.

Item Attributes:

* Flow Rate: 10.6 LPM
* Pressure: 30
* Pump Type: Pump Only
* Voltage: 12
* Maximum Current: 4.6

• Flow Rate : up to 2.0 GPM [7.6 LPM]
• Shut-Off Pressure : 30 PSI [2.0 BAR]
• Voltage : 12 VDC
• Amps (Max) : 4
• Duty : Intermittent Duty
• Dimensions : 7.3" x 5.0" x 4.6" [184 x 127 x 118 mm]
• Control : Adjustable Switch. Shut-Off 30 PSI [2.0 Bar] ± 5 PSI [0.4 Bar]
Restart 15 PSI [1.0 Bar] ± 5 PSI [0.4 Bar]
• Liquid: 130 °F [54 °C] Max
• Prime: 6 feet [1.82 M]
• Inlet PSI: 30 PSI [2.1 Bar] Max
• Run Dry: Yes
• Protection: Thermal Overload, Automatic Restart
• Leads: 16 AWG, 16” [40 cm] Red +, 13” [33 cm] Black -
• Fuse: 7 Amp Recommended

Multi-fixture marine fresh water installation. Other uses may included 12V DC pressurized water systems in cabins. This pump may be used for general water transfer.

* Connections: for 13mm (½”) bore hose or Hep20 push-fit connectors CW193
* Dimensions: 230mm long, 152mm wide, 110mm high
* Fuse Size: 10 amp
* Maximum Current: 4.4 amp @ 12 Volt
* Output: 11 litres/minute (2.4 gallons/minute) open flow
* PRESSURE SWITCH - cuts in at 1.0bar (15psi) - cuts out at 1.7bar (25psi)
* Efficient, high-flow, self-priming pump serving 2 or more outlets
* Multi-diaphragm design self primes to 1.8m vertical lift, can run dry without damage
* Supplied with snap-in ports for hose or Hep20 connectors
* Quiet running
* Motor protected by automatic thermal overload cut-out
* Includes bypass feature to provide smooth, quiet flow. No need for accumulator tank
* Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
* Actual Weight: 1.80 Kg (Approx. 2.30 Kg packed)

* Connections: for 13mm (½”) bore hose or Hep20 push-fit connectors CW193
* Dimensions: 230mm long, 152mm wide, 110mm high
* Fuse Size: 5 amp
* Maximum Current: 2.2 amp @ 24 Volt
* Output: 11 litres/minute (2.4 gallons/minute) open flow
* PRESSURE SWITCH - cuts in at 1.0bar (15psi) - cuts out at 1.7bar (25psi)
* Efficient, high-flow, self-priming pump serving 2 or more outlets
* Multi-diaphragm design self primes to 1.8m vertical lift, can run dry without damage
* Supplied with snap-in ports for hose or Hep20 connectors
* Quiet running
* Motor protected by automatic thermal overload cut-out
* Includes bypass feature to provide smooth, quiet flow. No need for accumulator tank
* Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
* Actual Weight: 1.80 Kg (Approx. 2.30 Kg packed)

* Connections: for 13mm (½”) bore hose or Hep20 push-fit connectors CW193
* Dimensions: 250mm long, 105mm wide, 100mm high
* Fuse Size: 15 amp
* Output: 16 litres/minute (3.5 gallons/minute) open flow
* PRESSURE SWITCH - cuts in at 1.0bar (15psi) - cuts out at 1.7bar (25psi)
* Efficient, high-flow, self-priming pump serving 4 or more outlets
* Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage
* Supplied with snap-in ports for hose or Hep20 connectors
* Motor protected by automatic thermal overload cut-out
* Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
* Actual Weight: 2.97 Kg (Approx. 3.47 Kg packed)

* Connections: for 13mm (½”) bore hose or Hep20 push-fit connectors CW193
* Dimensions: 250mm long, 105mm wide, 100mm high
* Fuse Size: 7 amp
* Output: 16 litres/minute (3.5 gallons/minute) open flow
* PRESSURE SWITCH - cuts in at 1.0bar (15psi) - cuts out at 1.7bar (25psi)
* Efficient, high-flow, self-priming pump serving 4 or more outlets
* Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage
* Supplied with snap-in ports for hose or Hep20 connectors
* Motor protected by automatic thermal overload cut-out
* Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm
* Actual Weight: 2.88 Kg (Approx. 3.38 Kg packed)

* Connections: - for 13mm (½”) bore hose or threaded ports
* Dimensions: - 214mm long, 119mm wide, 110mm deep
* Output: VOLUME - nominal 0.6 litre, working capacity up to approximately 0.3 litres
* Plastic vessel with internal membrane. May be mounted in any attitude
* Compact size for small pressure systems (typically 1 - 2 outlets).
* Supplied with 2 snap-in connectors for 13mm (½”) bore hose
* Actual Weight: 0.61 Kg (Approx. 0.86 Kg packed)

* Connections: - ½" BSP external threaded.
* Dimensions: - 230mm high, 125mm diameter
* Output: - nominal 2 litres, working capacity up to approximately 1 litre
* Enameled steel vessel with stainless steel flange and internal rubber membrane
* For small to medium-sized pressure systems
* May be mounted in any attitude
* Stainless steel and rubber wetted parts
* Maximum Recommended Working Pressure - 4 bar (60psi)
* Packaged Dimensions: L:26.00 x H:15.00 x W:15.00cm
* Actual Weight: 1.20 Kg (Approx. 1.70 Kg packed)